Knowledge Base
General
(5)
READ MORE
READ MORE
READ MORE
READ MORE
Research
(5)
READ MORE
Every bathroom is unique. We tailor-make each whirlpool bath to your specific needs, considering factors like:
- Accessibility: We can adjust pump and control placement for one-sided access or bath hoist compatibility.
- Plumbing and Space Constraints: We can work around existing plumbing and space limitations.
- Personalized Hydrotherapy: We can customize jet placement to target specific areas of pain or discomfort, such as the neck and shoulders.
By understanding your individual requirements, we ensure a perfect fit and a truly personalised hydrotherapy experience.
Yes, hydrotherapy baths can qualify for VAT relief if they are specifically designed and adapted to meet the needs of a disabled person. This includes modifications like:
- Control Placement: Moving controls to a more accessible location.
- Jet Configuration: Customizing jet placement for specific therapeutic needs.
- Additional Features: Incorporating features like inline heaters or chromotherapy lighting.
READ MORE
Fitting
(5)
READ MORE.
- Professional Installation: All electrical work must be performed by a qualified electrician.
- Power Supply: The pump requires a dedicated 13 Amp fused spur.
- Permanent Connection: The pump must be hardwired, not connected via a plug.
- Circuit Breaker: A circuit breaker with a separation distance of at least 3mm must be installed.
- Ground Fault Indicator: A ground fault indicator with a 30 mA release current is recommended.
Disclaimer: These guidelines are for reference only. It is the installer's responsibility to comply with all relevant regulations and safety standards.
READ MORE
While our baths are thoroughly tested before shipping, it's recommended to perform a final check before installation.
- Fill the Bath: Fill the bath with water, ensuring it's an inch above the highest jet.
- Run the System: Activate the whirlpool system and let it run for 10 minutes.
- Inspect for Leaks: Turn off the system and let the bath sit overnight. Carefully check all jets and pipe connections for any signs of leaks.
- Protect the Bath: Handle the bath carefully, avoiding damage. Use protective coverings during installation.
- Plumbing Preparation: Install water supply and drain connections before placing the bath.
- Wall Installation: Build a wall around the bath, ensuring a 10 cm overlap. Consider soundproofing tape for the rim.
- Floor Preparation: The floor should be firm, level, and inelastic.
- Leg Installation: Use the provided leg set to secure the bath in place.
- Overflow and Drain: Install the overflow and drain set according to instructions.
- Water Testing: Fill the bath to the overflow level to check for leaks. Seal any gaps with silicone or sealing tape.
- Tiling and Panels: Tile the exposed sides or use bath panels. Ensure easy access for maintenance.
Wellness
(4)
READ MORE
READ MORE
READ MORE
READ MORE
Aftercare
(3)
Monthly Maintenance:
- Fill the Bath: Fill the bath with warm water or leave water in after use.
- Add Cleaner: Add a sterilizing tab or whirlpool cleaner.
- Run the System: Run the whirlpool for 5 minutes.
- Drain and Rinse: Drain the water and optionally rinse the surfaces.
READ MORE
Luna Spas
(6)
READ MORE
READ MORE
Flatline flush jets, featured in all our whirlpool systems, offer several advantages over standard systems:
- Tips and tricks: For example, how to choose the right bath, maintenance tips, or energy-saving advice.
- Practical guides: Step-by-step instructions or checklists, such as a guide to choosing the right bathroom fixtures or a checklist for planning your bathroom renovation.
- Helpful resources: Links to relevant articles, videos, or other online resources that provide valuable information.